Teltonika TRB142 RS232 CAT1 LTE 4G Gateway

OverviewThe Teltonika TRB142 RS232 CAT1 LTE 4G Gateway is an ultra-small, lightweight, and energy-efficient IoT gateway equipped with mission-critical LTE connectivity. TRB142 comes with a widely used RS232 interface for remote management of industrial devices.Key features of the Teltonika TRB142 RS232 CAT1 LTE 4G Gateway include:High-Speed Connectivity: Experience lightning-fast LTE Cat 6 speeds with the RUT361, ensuring seamless data transmission for your critical operations.Dual SIM Functionality: Benefit from dual SIM slots that provide redundancy and failover capabilities, guaranteeing uninterrupted connectivity in mission-critical scenarios.Advanced Security: Prioritize data security with built-in VPN, firewall, and secure boot features that safeguard your network against cyber threats and unauthorized access.Industrial Design: Designed to withstand extreme conditions, the rugged RUT361 is a reliable choice for industrial environments where durability is non-negotiable.Remote Management: Simplify network administration with Teltonika’s RMS platform, enabling remote monitoring and configuration for enhanced operational efficiency.SpecificationsMobileMobile module4G LTE Cat 1 up to 10 DL/5 UL Mbps; 3G up to 384 DL/384 UL kbps; 2G up to 296 DL/236.8 UL kbps3GPP ReleaseRelease 12StatusIMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNCSMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPPUSSDSupports sending and reading Unstructured Supplementary Service Data messagesBlack/White listOperator black/white list (by country or separate operators)Multiple PDNPossibility to use different PDNs for multiple network access and servicesBand managementBand lock, Used band status displaySIM PIN code managementSIM PIN code management enables setting, changing, or disabling the SIM card’s PINAPNAuto APNBridgeDirect connection (bridge) between mobile ISP and device on LANPassthroughRouter assigns its mobile WAN IP address to another device on LAN NetworkRoutingStatic routingNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTTVoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rules, TTL target customisationFirewall status pageView all your Firewall statistics, rules, and rule countersPorts managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so onNetwork topologyVisual representation of your network, showing which devices are connected to which other devicesDHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcardsQoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyDNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPSNetwork backupMobile, VRRP, Wired options, each of which can be used as an automatic FailoverSSHFSPossibility to mount remote file system via SSH protocolTraffic ManagementReal-time monitoring, wireless signal charts, traffic usage history SecurityAuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS , Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generatorFirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLANPort and tag-based VLAN separationMobile quota controlMobile data limit, customizable period, start time, warning limit, phone numberWEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess controlFlexible access control of SSH, Web interface, CLI and TelnetSSL certificate generationLet’s encrypt support VPNOpenVPNMultiple clients and a server can run simultaneously, 27 encryption methodsOpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256IPsecXFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)GREGRE tunnel, GRE tunnel over IPsec supportPPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec supportStunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub supportSSTPSSTP client instance supportZeroTierZeroTier VPN client supportWireGuardWireGuard VPN client and server supportTincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support. OPC UASupported modesClient, ServerSupported connection typesTCP MODBUSSupported modesServer, ClientSupported connection typesTCP, RTU(RS232)Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionalitySupported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII DATA TO SERVERProtocolHTTP(S), MQTT, Azure MQTT, KinesisData to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router’s Data to server feature MQTT GatewayModbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker DNP3Supported modesStation, OutstationSupported connectionTCP, RTU(RS232) DLMSDLMS SupportDLMS – standard protocol for utility meter data exchangeSupported modesClientSupported connection typesTCP, RTU(RS232) APITeltonika Networks Web API (beta) supportExpand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com Monitoring & ManagementWEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet statusFOTAFirmware update from server, automatic notificationSSHSSH (v1, v2)SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GETCallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timerTR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTTMQTT Broker, MQTT publisherSNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protectionJSON-RPCManagement API over HTTP/HTTPSRMSTeltonika Remote Management System (RMS) IoT PlatformsThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocity – Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actionsAzure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs System CharacteristicsCPUARM Cortex-A7 1.2 GHzRAM128 MB, DDR2FLASH storage512 MB, SPI Flash FIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FWRMSUpdate FW/configuration for multiple devices at onceKeep settingsUpdate FW without losing current configurationFactory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration FIRMWARE CUSTOMISATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C , and Python in Package managerDevelopment toolsSDK package with build environment providedGPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needsPackage ManagerThe Package Manager is a service used to install additional software on the device Input / OutputConfigurable I/O2 x Configurable Inputs/Outputs. Digital input 0 – 5 V detected as logic low, 8 – 30 V detected as logic high. Open collectorConfigurable I/O output, max output 30 V, 300 mA. Configurable Inputs/Outputs are not available in TRB142*2****Output controlHTTP POST/GET, ScheduleEventsEmail, RMS, SMSI/O jugglerAllows to set certain I/O conditions to initiate event PowerConnector4-pin industrial DC power socketInput voltage range9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us maxPower consumption< 5 W Physical InterfacesI/O’s2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB142*2****)Status LEDs3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LEDSIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 VPower1 x 4-pin power connectorAntennas1 x SMA for LTEUSB1 x Virtual network interface via micro USBRS2321 x DB9 socketResetReboot/User default reset/Factory reset button Physical SpecificationCasing materialAluminium housingDimensions (W x H x D)74.5 x 25 x 64.4 mmWeight135 gMounting optionsDIN rail, wall mount, flat surface (all require additional kit) Operating EnvironmentOperating temperature-40 °C to 75 °COperating humidity10% to 90% non-condensingIngress Protection RatingIP30 Regulatory & Type ApprovalsRegulatoryCE, UKCA, EAC, UCRF, ANRT, Kenya, ICASA, Anatel, Arcotel, NOM, RCM, Giteki, NTC, SRRC, NAL, NBTC, CBOperatorDeutsche Telekom AG EMC Emissions & ImmunityStandardsDraft EN 301 489-1 V2.2.0Draft EN 301 489-52 V1.1.0ESDEN 61000-4-2:2009Radiated ImmunityEN IEC 61000-4-3:2006 A1:2008 A2:2010EFTEN 61000-4-4:2012Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014CSEN 61000-4-6:2014DIPEN 61000-4-11:2004 RFStandardsEN 301 511 V12.5.1EN 301 908-1 V13.1.1EN 301 908-2 V13.1.1EN 301 908-13 V13.1.1 SafetyStandardsCE: EN 62368-1:2014 A11:2017, EN IEC 62232:2020, EN 50385:2017UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019),CAN/CSA C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)RCM: AS/NZS 62368.1:2018CB: IEC 62368-1:2018