Teltonika RUT276 Compact RedCap 5G Router

Why Teltonika RUT276?If you need a small, tough, serial-friendly router that jumps you forward from 4G into 5G without the price/complexity of full-fat 5G modems, this is it. 5G RedCap gives you SA, low latency and better capacity than 4G.With Cat 4 4G fallback for universal coverage, the device keeps Teltonika’s familiar recipe: dual-SIM for resilience, proper VPNs, hardened firewall, multi-PDN/APN options, plus the RS232/RS485 terminal block that installers actually need on industrial jobs.  And of course, it’s RMS-managed out of the box.Key features (at a glance)5G RedCap (Sub-6GHz SA) – up to 223 Mbps DL / 123 Mbps UL; 4G LTE Cat 4 fallback up to 195/105 Mbps.Industrial serial on board – native RS232 RS485 via 6-pin terminal block; Modbus (RTU/TCP), OPC UA, BACnet, DNP3, DLMS/COSEM.Dual-SIM (2FF) with auto-failover, multi-PDN, band lock and APN/bridge/passthrough/framed-routing options.Wi-Fi 4 (2.4 GHz) – AP/Client/Mesh (802.11s), up to 50 clients, 802.11r/k/v roaming features.2× RJ45 (10/100) – WAN/LAN with VRRP, load-balancing and multi-WAN failover.Power options – 9–57 VDC via 2-pin, Active PoE 802.3af Class 0 on LAN, passive PoE-in support.Security first – stateful firewall, ACLs, DoS protection, web filter, 802.1X, cert manager, and a complete VPN suite.Rugged build – aluminium housing, DIN-rail/wall/flat mounting (with kits), IP30, compact 83×25×83 mm, 132 g.RMS-ready – fleet management, alerts, firmware/config push, secure remote access to LAN devices.SD card slot – microSD up to 2 TB for storage/logs.Typical applicationsSCADA & PLC integration (RS232/RS485) – water/wastewater, energy, utilities, BMS.Smart EV chargers & kiosks – resilient dual-SIM connectivity with RMS zero-touch.Smart-city & environmental sensors – low-latency RedCap, Wi-Fi client/mesh backhaul.Retail/Payment/ATM peripherals – WAN failover, secure tunnelling (WireGuard/IPsec).CCTV/ANPR edge nodes – outstation telemetry, secure backhaul, data-to-server via HTTP(S)/MQTT.RUT276 Connectors IoT SIMs & RMSWe supply UK/EU IoT SIMs (multi-network/roaming, private IP, VPN-ready). See: millbeck.co.uk/iot-sim for plans, fixed-data tiers and private APN/VPN options.Downloads (for your product page)RUT276 Datasheet (v1.00)RUT276 Quick Start GuideRUTOS Manual / Wiki (RUT276)RMS Overview(You can host these locally or link to Teltonika.)FAQIs RedCap “real 5G”?Yes—5G SA with reduced complexity and power draw. You get lower latency and better capacity than 4G, without the large 5G modem cost/heat.Does it work on 4G everywhere 5G isn’t present?Yes. It falls back to LTE Cat 4 with up to 195/105 Mbps headline rates.How many Ethernet ports?Two 10/100 ports—WAN and LAN. You still get multi-WAN features (failover/load-balance) using mobile plus wired/Wi-Fi.Can I power it by PoE?Yes—802.3af PoE-in on the LAN port (Class 0), or 9–57 VDC via the 2-pin terminal.Does it have I/O pins?RUT276 focuses on serial (RS232/RS485); digital I/O isn’t provided on this model.How many Wi-Fi clients?Up to 50 connected devices on 2.4 GHz (Wi-Fi 4) with AP/STA/Mesh modes and 802.11r/k/v roaming features.Is RMS required?No—but highly recommended for remote fleet management, secure tunnelling and bulk firmware/config.RUT276 Dimensions Millbeck IoT SIM & Connectivity — One Stop 4G/5G SolutionsPair your Teltonika RUT276 with the right connectivity from Millbeck.  We supply UK and global IoT SIM cards, roaming SIMs, multi-network SIMs, dynamic IP and fixed IP options (public or private), plus Cat-M1 and NB-IoT for low-power devices.  Add antennas and expert configuration and you have a complete, secure deployment from one supplier.SIM options we supplyRoaming & Multi-Network IoT SIMs: Automatic network selection for maximum uptime across the UK and EU.Dynamic IP IoT SIMs: Best for devices that initiate outbound connections to cloud platforms and email alerts.Private Fixed IP SIMs: Fixed private addressing with secure VPN access to your estate. Ideal for CCTV, BMS, PLC and SCADA.Public Fixed IP SIMs: Fixed public addressing when a public endpoint is required. We help you harden security and minimise unwanted traffic.Cat-M1 & NB-IoT SIMs: Low-power, deep-coverage options for sensors, telemetry and battery-powered endpoints.Routers, antennas and servicesRouters & accessories: Teltonika-approved hardware, PSUs and cabling.Antennas: 4G/5G MIMO, adhesive, magnetic, wall/roof-mount and outdoor options to suit the install.Configuration services: We pre-configure APNs, VPNs, firewall rules, RMS, SMS/email alerts and data-saving best practice.Security hardening: VPN-first access, locked management, IP allow-listing and bot-traffic mitigation for fixed IP deployments.Why MillbeckTeltonika Diamond Partner: Deep product knowledge and proven deployments since 2008.Commercial flexibility: Trial SIMs, pooled data and scalable tariffs for pilots through to national roll-outs.UK support: Straight answers, practical guidance and rapid turnaround.Not sure which SIM you need?Quick rule of thumb: If the device pushes data to the cloud, choose dynamic IP. If you need to reach in to the device, choose private fixed IP with VPN access. Public fixed IP is available for specific use cases, but lock it down properly.Explore Millbeck IoT SIMs Talk to an IoT specialist SKU: TELTONIKA-RUT276-N Categories: 5G Routers, Teltonika, Teltonika 5G Routers Tags: 5G, 5G Redcap, 5G redcap router, BACnet, Dual-SIM, Industrial router, Modbus, OPC UA, RedCap, rms, RS232, rs485, RUT276, Teltonika Brand: Teltonika