Product Description Genata Wireless Access Point (2.4G 300Mbps)- GNT-AP260 The GNT-AP260 Genata wireless access point (2.4G 300mbps) is a high-power ceiling wireless access point with Qualcomm QCA9531 Chipset. It is built to comply with the IEEE 802af standard, which enables high-efficiency power consumption, low heat generation, and a longer standby time. In addition, the Genta wireless access point has an auto channel selection wifi feature that allows it set the best frequency channel for each, based on a number of metrics that take account of such problems as interference from external sources and the communications with other networks. More Product Details DATA SHEET Hardware： MCU Qualcomm QCA9531 RF 2T2R, 300Mbps MIMO tech ,comply with IEEE 802.11b/g/n standard Memory 128MB DDR RAM Flash 16MB Power DC: 12V/1A; POE: IEEE 802.3af 48V PoE, 110V/220V Antenna Build in 2PCS Omni 5dbi antenna Size 188*188*50mm Interface 2 x RJ-45 for 10/100Mbps WAN/LAN Port (WAN port support IEEE 802.3af POE) 1 x Reset button(Reset& Factory Defaults) 1 x Power DC Jack RF: Modulation OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK Throughput 300Mbps Sensitivity 802.11n: -60dbm@MCS7, -78dbm@MCS0. 802.11g: -62dbm@54Mbps, -78dbm@6Mbps. 802.11b: -75dbm@11Mbps, -84dbm@1Mbps. RF Power 802.11n: @MCS7:17±2DB, @MCS0:18±2DB. 802.11g: @54M:16±2DB, @6M:18±2DB. 802.11b: @11M:15±2DB, @1M:17±2DB EVM 802.11n: ≤-17 DB 802.11g: ≤-15 DB 802.11b: ≤-10 DB Max Users 64 PPM ±20ppm Frequency 802.11b/g/n, 533MHz 2.4~2.4835GHz U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations Software: Operation Mode Gateway/ AP/ Repeater Protocol/Standard IEEE 802.3(Ethernet) IEEE 802.3u(Fast Ethernet) — Wireless Auto-Channel selection Distance Control (802.1x Ack timeout) BSSID Security WEP Encryption-64/128/152 bit WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) Hide SSID Physical Property: Temperature Working: -20°C~50°C Storage: -40°C to 70°C Humidity 5%~95% (typical) Management: System Settings Web-based configuration (HTTP/Telnet) Firmware Upgrade Upgrade firmware via web browser or TFTP Administration Admin Password can be configured System monitoring Status in hand , useful statistic and Event log Logs Supports local logs, logs host, logs file export Reset Reset or factory defaults Backup Restore settings & configuration of the device to local file Package: GNT-AP260 complete set User Manual 90mm LAN Cable Setting Accessory Category: Genata Networking Products Tag: Genata Products
